The Handi-Spray application systems were designed to atomize CorrosionX, CorrosionX® Aviation, CorrosionX® Extended Duty, NavGuard and other liquids into an incredibly fine, smoke-like fog. This fine atomization converts low and medium viscosity liquid products into micro-droplets, which stay suspended in the air for an extended period of time. This degree of atomization is key for achieving the most cost-effective and thorough application of corrosion preventative compounds into airframes and other irregularly shaped enclosures where direct application is not practical (e.g. around blind corners, unreachable areas, etc.).

Note: Unit ships empty


  • When properly fogged into an enclosed area like an airplane wing, the suspended CorrosionX Aviation vapor will entirely fill the void of an enclosed area and deposit a light coating of the product on every surface. This allows CorrosionX Aviation to go around blind corners, to treat the back sides of spars and to penetrate into lap seams and other areas that cannot be sprayed directly
  • In contrast, although overspraying and saturating an airframe using a common pump-up will usually not cause any damage, it will cause CorrosionX to drip and weep for longer than it needs to (not to mention wasting money by using excess product). The Handi-Spray systems will spray CorrosionX Heavy Duty nicely, but they are not able to atomize Heavy Duty as it is too thick to “fog”.
  • Used extensively by the U.S. military as well as NATO forces, all CorrosionX products and Handi-Spray application equipment have been assigned National Stock Numbers (NSN) by the General Services Agency (GSA) and are available for procurement through the Defense Logistics Agency (DLA).


  • Required Air Pressure: 80 PSI @ 5 – 6 CFM
  • Capacity: 5 gallons
  • Weight: 28lbs
  • Hose: 25ft
  • Color: Blue

In The Box

Basic Unit Includes:

  • 1″ cricket wand
  • 3ft x 1/4″ 360° wand
  • 3ft superflex wand

Complete Unit Includes:

  • 1″ cricket wand
  • 3ft x 1/4″ 360° wand
  • 3ft superflex wand
  • 8ft x 1/4″ 360° wand
  • 6ft x 3/16″ 45° fan wand
  • 5″ x 1/8″ hook wand
    • model:

      Basic Unit, Complete Unit

    Shopping cart