A structural resin filler. The mixture of cotton fiber and epoxy is referred to as “flox”. The mixture is used in structural joints and in areas where a very hard, durable buildup is required. Flox is mixed in much the same way as dry micro but only about two parts flock to one part epoxy is required. Mix in just enough flock to make the mixture stand up. If “wet flox” is called out, mix it so it will sag or run. Flox is often used to reinforce a sharp corner. Paint a light coat of pure epoxy inside the corner, trowel flox in to make a triangular support. The flox corner is done just before one glass surface is applied for a wet bond to one surface.
    • TAMAÑO:

      1 Lb Bag, 5 Lb bag

    Shopping cart