ALL-ELECTRONIC CIRCUIT BREAKERS

These circuit breakers operate differently from conventional circuit breakers in the following ways:

• 1. If the circuit breaker “trips”, the switch will remain in the up or on position, but a red LED will illuminate indicating the condition.

• 2. The electronic circuit breaker is a three-terminal device. In addition to the usual two terminals, a ground reference is required for the electronics to operate and as a reference for the overvoltage and undervoltage protection.

• 3. The 28V circuit breakers will shut down with an overvoltage of 33V. The circuit breakers will also shut down with a undervoltage of 10V for the 14V circuit breaker, or 20V for the 28V circuit breaker.

• They are available in 28V versions, with the following current levels: 1A, 2A, 5A, 10A.

NOT FAA APPROVED. For experimental aircraft only.