My Account

AURORA BEARINGS FEMALE

AURORA BEARINGS FEMALE

Categorías: AURORA, BEARINGS, PARTES DE FUSELAJE

*Select:

Aurora PN: GMW-3M-470 | Heim Equivalent PN: F34-14M | Thread Type: Right Hand

Aurora PN: GMG-3M-470 | Heim Equivalent PN: FL34-14M | Thread Type:Left Hand

Aurora PN: GMW-3M-471 | Heim Equivalent PN: F347-14M | Thread Type: Right Hand

Aurora PN: GMG-3M-471 | Heim Equivalent PN: FL347-14M | Thread Type:Left Hand

Aurora PN: GMW-3M-480 | Heim Equivalent PN: FS4-16MRight Hand | Thread Type:

Aurora PN: GMW-4M-470 | Heim Equivalent PN: F44-14M | Thread Type: Right Hand

Descripción

Overview

GMW-M & GMG-M Series Female Rod Ends, General Aviation – Precision

- Body – Carbon steel, protective coated for corrosion resistance.

- Race – Carbon steel,protective coated for corrosion resistance.

- Ball – Alloy steel, heat treated, hard chrome plated (AMS-QQ-C-320 Class 2).

- Left-hand threaded units have an identification groove near end of shank.

- Grease Fitting available for all sizes. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix “Z” or “F”. Ex.: GMW-3MZ-470 = Zerk Type Fitting GMW-3MF-470 = Flush Type Fitting.

- Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, consult our engineering department.

- For rod end bearings which are non-traceable or non-magnetic particle inspected, consult factory.

E-mail us by clicking here
Toll Free Order Line: 877-477-7823	Customer Service: 800-861-3192
Toll Free Fax Line: 800-329-3020	Outside USA: 951-372-9555
P.O. Box 4000 Corona, CA 92878-4000

Specification Chart

Aurora P/N	Heim P/N	Thread Type	SEE DIAGRAM ABOVE
Aurora P/N	Heim P/N	Thread Type	B (IN.)	W (IN.)	H (IN.)	A (IN.)	D (IN.)	K (IN.)	J (IN.)	N (IN.)	O (IN.)	C (IN.)	Thread Size	a (DEG.)
GMW-3M-570	F35-14M	Right Hand	.1900	.437	.328	1.375	.750	.468	.375	.312	.315	.750	1/4-28	10
GMG-3M-570	FL35-14M	Left Hand	.1900	.437	.328	1.375	.750	.468	.375	.312	.315	.750	1/4-28	10
GMG-3M-470	–	Left Hand	.1900	.437	.328	1.375	.750	.468	.375	.312	.315	.750	1/4-28	10
GMW-3M-470	–	Right Hand	.1900	.437	.328	1.375	.750	.468	.375	.312	.315	.750	1/4-28	10
GMW-3M-471	F347-14M	Right Hand	.1900	.437	.328	1.062	.750	.375	–	–	.315	.437	1/4-28	10
GMG-3M-471	FL347-14M	Left Hand	.1900	.437	.328	1.062	.750	.375	–	–	.315	.437	1/4-28	10
GMW-3M-480	FS4-16M	Right Hand	.1900	.500	.375	1.375	.812	.468	.375	.312	.312	.750	1/4-28	15
GMG-3M-480	FL34-16M	Left Hand	.1900	.500	.375	1.375	.812	.468	.375	.312	.312	.750	1/4-28	15
GMW-4M-470	F44-14M	Right Hand	.2500	.437	.304	1.375	.812	.468	.375	.312	.353	.750	1/4-28	18
GMG-4M-470	FL44-14M	Left Hand	.2500	.437	.304	1.375	.812	.468	.375	.312	.353	.750	1/4-28	18
GMW-4M-595	F45-19M	Right Hand	.2500	.593	.406	1.469	.938	.500	–	.312	.485	.844	5/16-24	10
GMG-4M-595	FL45-19M	Left Hand	.2500	.593	.406	1.469	.938	.500	–	.312	.485	.844	5/16-24	10