UHS FIBERGLASS SPINNER KITS
Price range: 240.68$ through 385.00$ + IVA
Overview
| UHS spinners are practical, attractive, and flight proven having enhanced the apperance of many different aircraft. The spinners are available in various diameters for different engine and propeller combinations. For GSC, Ivoprop, Warp Drive, and Power Fin propellers using Rotax, Lycoming, Cont. & Mosler engines, spinners are sent cut out and assembled.
**Note: kits include hardware and bulkhead.** For pre-drilled cut-outs we require the following information:
Based on information provided, spinner size may vary from 1/8″ to 1/2″ larger in diameter. Given adequate information, we can also fabricate spinners for many other propeller-engine combinations. Call with your requirements and we will assess your particular application. Please complete the UHS Spinner Form, and submit with your order. The UHS Spinner Form can be downloaded at the below link in PDF format. |
Installation
For example:
The “10” spinner is actually 10.375″. If it is installed without being shortened, it is 10.375″. If it is installed with an IVO Patriot, which is only 1.375″ thick, the dome is cut shorter and will be 10″.
All our spinners are sent out balanced to a tolerance of about 1 gram (28grams = 1 ounce). For example, if you remove one of the 8-32 x 3/4″ dome mounting bolts from a balanced spinner and put it back on the balancing rig, it shows as being “sharply out of balance”.
