PS ENGINEERING PMA8000E DUAL AUDIO PANEL WITH CVR 14/28 VDC MARKER
Part# 11-14376
Overview
| The PMA8000E represents another advancement in cockpit audio control and intercommunications utility. Using our patented IntelliVox® design and pilot programmable configurations, this marks the next level of audio control.
The unit is designed for outstanding ergonomics with visually defined mode annunciation and selections. The PMA8000E is specifically designed to be used in a dual audio panel environment; where the pilot and copilot positions have independent control over the radio audio control. A pair of PMA8000E units share information between the units to make the operation logical and utilitarian, and avoid operations that are inconsistent with radio and cockpit communications practices. With digital interface control, the pilot is always in control while allowing the copilot to off load radio communications as well allow access to the passengers without interrupting the pilot. If the aircraft owner chooses, Bluetooth® can be enabled, allowing unprecedented capabilities for the crew or passengers to distribute phone calls or music. With two independent Bluetooth® interfaces, any one of a number of configurations will allow distribution of telephone and music. And like all of our PMA8000 series, there are front panel configuration that allows both the pilot and copilot to configure the intercom to best suit the needs of the cockpit crew and passengers. |
Specifications
|
TSO Compliance
|
|
|---|---|
|
Marker Beacon:
|
FAA TSO C35d, Class A ETSO 2C35d
|
|
Audio Selector/Intercom
|
FAA TSO C50c, Class 1a ETSO C50c
|
|
Applicable Documents:
|
RTCA/DO-214 RTCA/DO-143 RTCA/DO-160D
|
|
RTCA/DO-178B DO-254
|
|
|
Environmental Qualifications:
|
A1D1CABSMXXXXXXZBABATBXXE2XXX
|
|
Operating Temperature Range:
|
-15º C to 55ºC
|
|
Altitude:
|
Up to 50,000 feet in an non-pressurized area
|
|
Dimensions:
|
Height: 1.3 in. (3.3 cm) Width: 6.25 in. (16.9 cm)
|
|
Depth behind panel 7.15 in. (18.16 cm)
|
|
|
Weight
|
|
|
PMA8000E Unit
|
1.34 lb. (0.61 kg)
|
|
Rack with connectors
|
0.51 lb. (0.24 kg)
|
|
Power Requirements
(Including Internal Lighting): |
|
|
Voltage:
|
11 to 33 VDC
|
|
Maximum Current:
|
2.5 Amp (Externally protected by a 5A pull-type breaker)
|
