TANIS FIXED WING PREHEAT KIT WITH ADHESIVE – C208B – 230V
|Fixed Wing Preheat Kit with Battery Heat – 230 Volt for Cessna 208 with PT6a-140(A) engines.
Engine preheating is accomplished through electrical resistance heat in the form of thin pads sized and shaped to fit various parts. The pads are surface mounted with a bonding sealant/adhesive. Heated items include, engine accessory/reduction gearboxes, fluids, batteries and attached accessories. Power is routed to the heat elements through a dedicated wiring assembly with power indication and circuit overload protection. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.
This preheat kit when installed will supply 555 watts with a 2.4 amp draw at 230 volts.
NOTE: This kit is not eligible for an 8130-3.
- Turbine Model: Cessna 208B
- Engine Manufacturer: Pratt & Whitney
- Voltage: 230V
- USA-Cert (8130-3 available): N/A (NO)