THERMO-TEC COOL IT MAT
Categorías: BLAFFLING MATERIAL, HEAT SHIELDS, PARTES DE FUSELAJE
MFR Model# 14100
Overview
| Use the Cool-It Mat to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. It is also perfect in doors, under hoods, and above transmission housings.
The Cool-It Mat is composed of resin-bonded silica blanketing insulation sandwiched between a Mylar facing on one side and a foil facing on the other. The highly-reflective Mylar reflects heat up to 2000 degrees Fahrenheit away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection. The silica blanketing is a dual-density composite and is the main sound insulator. It is easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive. Available in three convenient sizes, including a 50′ roll, Cool-It Mat is approx 1/4″ thick expanded (1/16″ compressed). |
Specifications
- 24″ x 48″ x 1/16″ thick compressed (Note: Due to it being insulation material, it is difficult to measure exact thickness as it expands and compresses with pressure)
- Temperature range of insulation: 400 degrees F
- Temperature range of foil: 1200-1500 degrees F
- Weight: 14.5oz Square yard
- Weight per square foot is .34 of a pound
- Thermal conductivity rating of .270 Btu/hr.ft.degF @ 75 degrees F
- Thermal resistance rating R of .92 (m2K)/W
- Noise reduction: 3-5 db
- Bulk density is 1.84 pounds
- Flammability: MD 4.0 in/min max and CMD 4.0 in/min max
