WEST SYSTEM 206 SLOW HARDENER

Overview

206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, the cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. 206 Slow Hardener is not intended for clear coating.

  • Pot life at 72°F (22°C): 20 to 25 minutes
  • Cure to a solid state: 10 to 15 hours
  • Cure to maximum strength: 1 to 4 days
  • Minimum recommended temperature: 60°F (16°C)

Documents

  •   Technical Data Sheet (PDF)
  •   Safety Data Sheet (PDF)
  •   West System User Manual (PDF)

    Overview

    206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, the cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. 206 Slow Hardener is not intended for clear coating.

    • Pot life at 72°F (22°C): 20 to 25 minutes
    • Cure to a solid state: 10 to 15 hours
    • Cure to maximum strength: 1 to 4 days
    • Minimum recommended temperature: 60°F (16°C)
    • TAMAÑO:

      1/2 Pint, Quart, Gallon

    Shopping cart