TANIS OIL TANK PREHEATER KIT WITH ADHESIVE – 230V
|Oil Tank Preheater Kit with Adhesive – 230V.
Engine Oil Tank preheating is provided through the use of 2 pad heat elements bonded on the Oil tank(s) or case(s). This kit heats only the oil in the tank(s) for Radial engines like those in the G-164 Ag Cat and is not recommended for install on any engine that is not a radial.
This system does not heat the engine cylinders and other components. For operation below freezing, a complete preheat system should incorporate battery and avionics preheat.
This preheat kit when installed will supply 240 watts with a 1.0 amp draw at 230 volts.
- Cylinder Piston/Radial: N/A
- Engine Manufacturer: Any Radial (Oil Tank)
- Voltage: 230V
- USA-Cert (8130-3 available): PMA Kit (YES)