MATERIALES COMPUESTOS
Sort by
View
Overview Aeropoxy Light, a modification of the ES6279 adhesive system, is a two-component paste epoxy patching and filler compound for…
Overview Hardener PH3663 is the standard production hardener for fabricating composite parts. PH3663 has a 90 minute working time which…
Overview PT1105 is a white, general purpose room temperature epoxy surface coat resin. The creamy,smooth consistency of the mixed material…
Overview PT2712 is a low viscosity epoxy system designed for the fabrication of parts and structures by the resin infusion…
Part# 01-00295 MFR Model# EES6209 A/B
Overview PR2032 is a medium viscosity, unfilled light amber resin that is designed for structural production applications. PR2032, when used…
Part# 01-01620 MFR Model# AIRTAC-3-CANISTER
Part# 01-01621 MFR Model# AIRTAC-3-SPRAY
Overview AKZO interior epoxy primer #463.12-8 is a chemically cured 2-component epoxy primer designed to provide maximum protection from various…
Part# 05-26513 MFR Model# APW STD-0190-100-0050
Part# 05-26513
Overview Available exclusively from us AlphaPoxy is a low-cost flexible epoxy system that is ideal for laying up non-structural parts…
Overview Available exclusively from us AlphaPoxy is a low-cost flexible epoxy system that is ideal for laying up non-structural parts…
Overview Available exclusively from us AlphaPoxy is a low-cost flexible epoxy system that is ideal for laying up non-structural parts…
Part# 12-00482 MFR Model# ER5356-.045
Part# 12-00483 MFR Model# ER5356-1/16
Overview Use on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding of most…
Overview Note: Meets FAR 23.853(a) 17″ x 18″ x 1″ sheet 36″ x 80″ x 1″ sheet Backsaver foam is…
Part# 01-14894
Overview Woven graphite is an excellent alternative to fiberglass and Kevlar – only mils thick with great strength. In addition…
Overview **Note: These products are sold by the yard** “Kevlar” 49 aramid fiber was introduced commercially in 1972 and is…
Part# 01-01457 MFR Model# 171
Overview INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the…
Overview INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the…
Overview INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of…
Part# 01-01451 MFR Model# 134
Part# 01-01451 MFR Model# 134
Overview INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by…
Part# 01-01443 MFR Model# 202
Part# 01-01444 MFR Model# 206 - BSI
Part# 01-01450 MFR Model# 127
Part# 01-01450 MFR Model# 127
Part# 01-01456 MFR Model# 161
Overview Cab-O-Sil is a fumed lightweight silica thickener used to reduce the flow of epoxies on vertical surfaces, as well…
Part# 01-01294
Part# 01-01609
Overview We offer structural tubing and structural torsion tubing, engineered and built to meet your exact specifications and tolerances. Structural…
Overview High strength (470,000 PSI) carbon fibers are used as reinforcement in high performance structural composites for aircraft applications, recreational…
Part# 01-01180
Overview A Resorcinol Formaldehyde Adhesive capable of curing at room temperature and providing strong, durable, waterproof bonds. Comes in two…
Part# 01-00689 MFR Model# QA-6
Part# 04-02059 MFR Model# CB92
Overview **Note: this tape is designed to be used on curved adges** FAA approved. Must be used with Ceconite STC.…
Part# 09-00900 MFR Model# 17-C102
Part# 09-00700 MFR Model# 17-C101
Part# 09-00921 MFR Model# 17-LIGHTU
Overview (FAA APPROVED) Polyester twill with adhesive back. Applied under rib lacing, pop rivets, or PK screws to prevent fabric from…
Part# 12-02585
Part# 12-04970 MFR Model# 10544
Overview Sure Seam is a high quality, high tack fabric cement which has excellent bonding properties. CERTIFIED COATINGS PRODUCTS, located…
Part# 04-03598 MFR Model# CB200-40
Overview Click Bond Adhesive Dispensers Slides.
Part# 04-04074 MFR Model# CB-100
Part# 04-04075 MFR Model# CB-106
Part# 04-06040 MFR Model# CB200
Part# 04-04076
Part# 04-04077 MFR Model# CB-911
Part# 05-14712 MFR Model# CB92
Overview All designers highly recommend that builders who are considering a composite project purchase this practice kit. It contains the…
Part# 01-00166
Overview Confor Form (formerly called Temperfoam) is the conforming foam cushion that was developed for the “Astronaut’s Couch” back in…
Part# 09-04577
Overview DACRON BIAS TAPE For Homebuilt Aircraft NOT FOR USE ON CERTIFIED AIRCRAFT Bias-cut tapes (weave 45° to edge) are…
Part# 09-15400
Overview Note: All sizes and types sold in 50 yard rolls A layer of 2.7 oz. Dacron fabric strips or…
Overview Note: All sizes and types sold in 50 yard rolls A layer of 2.7 oz. Dacron fabric strips or…
Part# 0271 MFR Model# 7488A65
Part# 15-04589 MFR Model# 20409
Overview Polyethylene bottle with Yorker (applicator) cap.
Overview Polyethylene bottle with Yorker (applicator) cap.
Part# 01-08503
Part# 01-08503
Part# 01-14710
Overview Divinycell: A closed cell medium to high density foam which has high compression strength, durability, and excellent fire resistance.…
Overview Grade B fabric patches for quick repairs on Grade B & Dacron covering. Smooth edge, 2.5″ dia. Also available…
Part# 09-05663 MFR Model# 739
Part# 09-05339 MFR Model# 4098499
Overview Sealing openings in modules and housings; adding mechanical stability to individual components; assembly of components on PWBs; sealing in…
Part# 01-00229
Part# 01-22000
Part# 01-01056
Part# 01-18600
Part# 01-18700
Part# 01-00131
Part# 01-01145
Part# 09-02099
Part# 01-00382
Overview A formulation of polyester resin, talcs and Microspheres used as a lightweight filler on metal and fiberglass. Works easily,…
Part# 01-01103 MFR Model# 7000125051
Part# 01-01073 MFR Model# 7000125048
JUMP TO Overview Specifications Documents Reviews Q&A View in Catalog Overview In early 1996, Composite Design Co. developed E-Z…
Overview In early 1996, Composite Design Co. developed E-Z Poxy to provide a replacement epoxy system for Epolite (Safe-T-Poxy) which…
Part# 01-01602
Overview These Clear Kits are ideal for sealing / clear-coating surfaces such as concrete and wood, as well as for…
Overview EcoTrowel is a high performance epoxy filler and profiling product formulated for surface repair and preparation. It is easy…
verview EcoTrowel is a high performance epoxy filler and profiling product formulated for surface repair and preparation. It is easy…
Part# 09-04116 MFR Model# EPFSK10-6L
Part# 09-04567 MFR Model# EPLPC10-8X500ML
